Basic concept of Transformer


Definition of Transformer :

 Electrical power transformer is a static device which transforms electrical energy from one circuit to another without any direct electrical connection and with the help of mutual induction between two windings. It transforms power from one circuit to another without changing its frequency but may be in different power level.

A transformer is a device that transforms voltage from one level to another. Transformer working is based on mutual emf induction between two coils, which are magnetically coupled.

Working Principle Of Transformer :

 When an AC voltage is applied to one of the windings (called as the primary), it produces alternating magnetic flux in the core made of magnetic material (usually some form of steel). 

The flux is produced by a small magnetizing current which flows through the winding. The alternating magnetic flux induces an electromotive force (EMF) in the secondary winding magnetically linked with the same core and appears as
a voltage across the terminals of this winding. Cold rolled grain oriented (CRGO) steel is used as the core material to provide a low reluctance, low loss flux path. The steel is in the form of varnished laminations to reduce eddy current flow and losses on account of this.


Basic-concep-of-Transformer
fig. Basic-concep-of-Transformer

There is a very simple and straight relationship between the potential across the primary coil and the potential induced in the secondary coil. The ratio of the primary potential to the secondary potential is the ratio of the number
of turns in each and is represented as follows:

            N1/N2 = V1/V2

Current-induced
When the transformer is loaded, then the current is inversely proportional to the voltages and is represented as follows:
             N1/N2 = V1/V2= I2/I1


Share this post to your friends by this they know About Transformers.

Post a Comment

أحدث أقدم